OM3242 Operator Cab And Controls - Section 32 Page 32-11 OPERATOR’S SEAT Adjustment The operator's seat provides a fully adjustable cush- ioned ride for driver comfort and easy operation. The following adjustments must be made while sitting in the seat. Refer to Figure 32-5. 1. Headrest - Move headrest (1) up, down, fore, or aft to the desired position. 2. Seat Height - Push and hold switch (2) to adjust the height of the seat. Release the switch to lock when the desired height is reached. 3. Lumbar Support - Move dial (3) to adjust the lumbar support to the desired position. 4. Armrest Tilt - Rotate adjusting knob (4) until the armrest is in desired position. 5.
Seat Belt - The operator must always have seat belt (5) buckled and properly adjusted when- ever the truck is being operated. 6. Backrest Recline - Lift handle (6) to select the desired backrest recline. Release the handle to set the position. 7. Fore/Aft Location of Seat - Lift and hold lever (7) and move the seat to a comfortable height. Release the lever to lock the height adjustment. FIGURE 32-5. OPERATOR’S SEAT ADJUSTMENT 1. Headrest 2. Seat Height 3. Lumbar Support 4. Armrest Tilt CONTROLS 5. Seat Belt 6. Backrest Recline 7. Fore and Aft