44 1820 - DRILLING ATTACHMENT DRILLING ATTACHMENT CONTROL DESCRIPTION 44 1820 - DRILLING ATTACHMENT p DRILLING ATTACHMENT CONTROL DESCRIPTION DRILLING ATTACHMENT CONTROL DESCRIPTION DRILLING ATTACHMENT CONTROL DESCRIPTION Drilling Control Drilling Control This switch controls drill string rotation. This switch controls drill string rotation. To rotate clockwise, press top. To rotate clockwise, press top. To rotate counterclockwise, press bottom. To rotate counterclockwise, press bottom. IMPORTANT: Always rotate clockwise during drilling and backreaming. Rotate counterclockwise only to dislodge a dry bore bit or reamer that has siezed in the bore hole. c00ic084a.eps IMPORTANT:
Always rotate clockwise during drilling and backreaming. Rotate counterclockwise only to dislodge a dry bore bit or reamer that has siezed in the bore hole. c00ic084a.eps IMPORTANT: IMPORTANT: This switch is spring-loaded and will automatically stop the drilling attachment when released. This switch is spring-loaded and will automatically stop the drilling attachment when released. If using only remote handle, switch will not be mounted on dash. If using only remote handle, switch will not be mounted on dash.