PREPARE JOBSITE AND EQUIPMENT 1820 - DRILLING ATTACHMENT 45 PREPARE JOBSITE AND EQUIPMENT p 1820 - DRILLING ATTACHMENT 45 PREPARE JOBSITE AND EQUIPMENT PREPARE JOBSITE AND EQUIPMENT om0529h eps om0529h eps Approach Trench (1) Approach Trench (1) 1. Mark path where you intend to drill. 1. Mark path where you intend to drill. 2. Dig an approach trench (1) along the intended drill path. 2. Dig an approach trench (1) along the intended drill path. IMPORTANT: The approach trench should be at least: IMPORTANT: The approach trench should be at least:
deep enough for pipe to lay flat and enter soil at correct angle deep enough for pipe to lay flat and enter soil at correct angle 20’ (6 m) long 20’ (6 m) long 4" (100 mm) wide 4" (100 mm) wide Target Trench (2) Target Trench (2) 1. Select a completion point for the drilling project. 1. Select a completion point for the drilling project. 2. Dig a target trench (2) across the anticipated completion point. 2. Dig a target trench (2) across the anticipated completion point. IMPORTANT: The actual length of the target trench depends on soil conditions and length of pipe sections. Make it deep enough for drill bit to enter slightly above the trench floor. IMPORTANT:
The actual length of the target trench depends on soil conditions and length of pipe sections. Make it deep enough for drill bit to enter slightly above the trench floor. 1 2 1 2