12 Multiplexed Electrical System Service Manual 12 - 12 PM819023/KM815057 (08/14/2012) DTC Input Received By Item / System Description Detailed Description 237801 Chassis Node Exterior Lighting - Marker Lamp Marker lamp output general error This set of DTCs will be recorded when there is a problem with one of the Marker Lamp circuit. This could be caused by failed bulbs, wiring harness issues, or corroded connectors. Marker lamp relay control output from Pin 10 of the Chassis Node connector A.
237803 Marker lamp output short to power 237805 Marker lamp output under current or open circuit 237806 Marker lamp output over current 237813 Marker lamp output general error 237831 Marker lamp output not available 238201 CECU Exterior Lighting - Clearance Lamp Clearance lamp output general error This set of DTCs will be recorded when there is a problem with one of the Clearance Lamp circuit. This could be caused by failed bulbs, wiring harness issues, or corroded connectors.
238203 Clearance lamp output short to power 238205 Clearance lamp output under current or open circuit 238206 Clearance lamp output over current 238213 Clearance lamp output general error 238231 Clearance lamp output not available 238801 Chassis Node Exterior Lighting - Fog Lamp Fog lamp output general error This set of DTCs will be recorded when there is a problem with one of the Fog Lamp circuit. This could be caused by failed bulbs, wiring harness issues, or corroded connectors. Fog lamps output from Pin 15 of the Chassis Node connector B.
238803 Fog lamp output short to power 238805 Fog lamp output under current or open circuit 238806 Fog lamp output over current 238813 Fog lamp output general error 238831 Fog lamp output not available 239001 Chassis Node Exterior Lighting - Secondary Fog Lamp Secondary fog lamp output general error This set of DTCs will be recorded when there is a problem with one of the Secondary Fog Lamp circuit. This could be caused by failed bulbs, wiring harness issues, or corroded connectors. Secondary fog lamp relay control output from Pin 18 of the Chassis Node connector C.
239003 Secondary fog lamp output short to power 239005 Secondary fog lamp output under current or open circuit 239006 Secondary fog lamp output over current 239013 Secondary fog lamp output general error 239031 Secondary fog lamp output not available 239102 Chassis Node Backup Switch Invalid input from backup alarm mute switch This DTC will be recorded when the control unit sees an invalid voltage range from the backup alarm mute switch. Some possible causes for this are an intermittent connection at the switch, corroded or broken wire or bad switch.
239202 Chassis Node Reverse Switch Invalid input from reverse switch This DTC will be recorded when the control unit sees an invalid voltage range from the reverse switch. Some possible causes for this are an intermittent connection at the switch, corroded or broken wire or bad switch.