PACCAR Inc. — Description of Warning Symbols

WARNING SYMBOLS Description of Warning Symbols For vehicles equipped with Electronic Stability Program, please refer to additional material supplied with this operator manual, included in your glove box informational packet. NOTE If this chassis is equipped with an electronic stability program (ESP) and is modified (e.g. adding or removing an axle, converting from a truck to a tractor, converting from a tractor to a truck, changing the body, lengthening of the wheelbase and/or frame, relocating frame components, or modifying pneumatic or electrical ABS/ESP harnesses) the ESP must be disabled by a qualified technician. If you have any questions, contact your authorized dealer.

Failure to comply may result in death, personal injury, equipment or property damage. WARNING 1. Axle, Traction Control (ATC or Automatic Traction Control) A. Illuminates during the power-on self test when the ignition is turned ON. It turns off after a few seconds if no system problems are detected. If an ATC problem is detected, the ATC Warning lamp will turn on and stay on. 3 B. Flashes when the ATC is regulating wheel spin. (Refer to Automatic Traction Control for more information.) C. It blinks continuously when the Deep Snow & Mud switch is turned on, indicating that this feature is active.

(Refer to Deep Snow and Mud Switch and Anti-Lock Braking System on page 4-21 for more information.) 2. Brakes, Anti-Lock Brake System (ABS) Illuminates during the Instrumentation System Self Test. Have the ABS system checked by an authorized 3-37