PACCAR Inc. — Description of Warning Symbols

WARNING SYMBOLS dealer if the ABS Warning Lamp stays on for more than 3 seconds. 6. Brakes, Trailer Anti-Lock Brake System (ABS) Tractors/Trucks and trailers built after 3/1/01 must be able to turn on an In-Cab Trailer ABS Warning Lamp (per U.S. FMVSS121). The industry chose Power Line Communication (PLC) as the standard method to turn it on. See Trailer ABS Warning Lamp on page 4-21 for more information. On trailers built prior to 3/1/01 verify trailer ABS system status via the required external warning lamp mounted on the trailer. The indicator lamp on the trailer should be yellow and identified with the letters “ABS”.

NOTE Illuminates during normal operating conditions to indicate a problem with the ABS System. See ABS Warning Lamps on page 4-21 for more information. Illuminates during the Instrumentation System Self Test and the tractor/truck is connected with a ABS equipped trailer. 3 Illuminates when a problem exists with the optional Wheel Spin Control feature. See Advanced ABS with Stability Control on page 4-21 for more information. Illuminates during normal operating conditions to indicate a problem with the Trailer ABS System. This should be checked by an authorized dealer as soon as possible. See ABS Warning Lamps on page 4-21 for more information. 4.

Brake, Park Brake Illuminates in the status indicator when parking brakes are applied. 7. Differential, Inter Axle Diff Lock 5. Brake, Service Brake Illuminates when the inter-axle differential switch is ON thus locking the inter-axle differential. This powers the forward rear and the rear rear Indicates that a fault exists in the brake system. This should be checked by an authorized dealer as soon as possible. 3-38