PACCAR Inc. — Controls On The Steering Column

SWITCHES 2. Turn Signal/High Beam Switch To signal a right turn, push the lever forward (clockwise). NOTE To signal a left turn, pull the lever back (counterclockwise). The ignition key must be turned to ON for the signal/switch to operate. Each time the turn indicator is activated the audible warning emits a short beep. 3 The lever-action turn signal/high beam switch is located on the left side of the steering column.. Each time a turn indicator is activated the buzzer emits a short beep.

If the vehicle turn signals and turn signal indicators in the dash gauge cluster ever begin flashing at an accelerated rate (115 cycles per minute) when the turn signal lever is in the OFF (center) position, or when a Right/Left turn has been selected, the problem may be related to a failed turn signal switch or turn signal module. In either case, the problem is not a failed bulb. Contact your nearest authorized dealer to have the problem corrected as soon as possible. NOTE Steering Column Unlocked Turn Signals Turn Signal 3-68