PACCAR Inc. — Controls On The Steering Column

SWITCHES To return to previous beam: pull the lever towards the steering wheel again. After you complete a turn, shut the system off by returning the lever to the (center) position. Failure to shut off a turn signal could confuse other drivers and result in an injury accident. An indicator light in the instrument panel will flash until the turn signal is turned off. WARNING The high beams can be momentarily flashed with or without the headlights being on. To flash the high beams, gently push the headlight lever away from the steering wheel to momentarily turn on the lights. 3 High Beam NOTE NOTE Continued pressing of the high beam flash will not keep the high beams on.

The headlights must be ON for the high beam switch to operate. To switch your headlights to lower or higher beam, gently pull the turn signal lever, toward the steering wheel, until you hear the switch click and the beam changes. The blue indicator light in the instrument panel will be ON when the high beam is being used. Flash to pass 3-69