HEATING AND AIR CONDITIONING Operating tips when overriding automatic controls How To Use The System Sleeper Override Switch (for vehicles with a sleeper) The engine must be running for the heater and air conditioner to generate hot and cold air. Press this button if the user wants to control the on/off function of the sleeper heating and air conditioning unit. Using this button does not allow this control unit to control sleeper blower speed or sleeper temperature. It only turns the sleeper heating and air conditioning unit on or off. An air conditioner can reduce fog build up on the windshield by setting it to the defrost or the floor/defrost air selection.
To increase the effectiveness of the air conditioner, use the A/C button in the ON position, increase the air temperature setting and/or increase the fan speed. To Cool - Manually Push the Fresh Air/Recirculation Switch to the Fresh Air mode (Blue indicator light off). Manually setting the system to recirculate air will increase the effectiveness and uses the least amount of fuel. 3 If the cabin becomes humid or damp, use the air conditioner with the fan on, with fresh air (not in recirculate air mode) and the A/C in the ON position to dry the cabin air. Turn ON the Fan Control Dial to the desired fan speed.
In situations where more cooling of the cab is required, make sure the system is in the recirculation mode. This setting will be more effective than using fresh air. Turn Temperature Dial to Desired Setting. Turn the Air Flow Control Dial to Dash Vents. 3-85