HEATING AND AIR CONDITIONING If the outside air is not cold enough to cool the cab, press to engage the compressor which will deliver colder air. Using this function in "manual" mode will provide the maximum heating performance. The air conditioner removes moisture from the air while the heater heats the air. For more cooling effect, you may need to press the switch back to recirculation mode. To Dehumidify To Defog and Defrost the Windshield Push the Fresh Air/Recirculate Switch to the Fresh Air mode (Blue indicator light off). 3 Turn the Fan Control Dial clockwise to the highest fan speed. To Heat Turn the Fan Control Dial ON to the desired fan speed.
Turn ON the Air Conditioning Switch (Blue indicator light on). Turn the Air Flow Control Dial to Defrost Vents. Fresh air and air conditioning are automatically turned ON. Turn the Air Flow Control Dial to Floor Vents. Turn ON the Fan Control Dial to the desired fan speed. Adjust the Temperature Control Dial clockwise to full heat. Adjust the Temperature Control Dial clockwise until the air temperature feels comfortable. Adjust the Temperature Control Dial until the air temperature feels comfortable. 3-86