PREVENTIVE MAINTENANCE SCHEDULE 5 5-22 PREVENTIVE MAINTENANCE (PM) INTERVALS SYSTEM COMPONENT MAINTENANCE TASK Recommended PM Interval I A B C D E Main & auxiliary transmission Main & auxiliary transmission and transfer case Inspect for visible damage, signs of overheating, and leaks. X X Check the drain plugs for tightness. X Mounting Brackets and Fasteners Check the condition of the fasteners and their torque. Tighten to the specified torque value as required. X Oil cooler Clean the fins (air-to-oil type) and body. Check the hose condition and for leaks; replace as required. X Main & aux. transmission Check the oil level; refill as required.
X Main & auxiliary transmission (ON HIGHWAY) Drain lubricant while warm. Flush each unit with clean flushing oil. 500,000 miles/ 800,000 km Main & auxiliary transmission (OFF HIGHWAY) Drain lubricant while warm. Flush each unit with clean flushing oil. X X Auxiliary transmission Cotta Transfer Case TR2205 Fabco Transfer Case TC142/TC143/TC170/ TC270 Marmon-Harrington Transfer Case MVG2000/MVG2000SD Inspect: Check oil level; inspect for leaks and any visible damage. X Initial oil change: Drain oil while warm; flush case with gear oil-compatible fluid; clean magnetic drain plug; refill. Do not flush the case with any solvent. X X Change oil. X