PACCAR Inc. — Maintenance Schedule

PREVENTIVE MAINTENANCE SCHEDULE 5 5-29 PREVENTIVE MAINTENANCE (PM) INTERVALS SYSTEM COMPONENT MAINTENANCE TASK Recommended PM Interval I A B C D E Battery Boxes, Tool Boxes, and Steps Battery cables Check the condition of the cables, cushion clamps, nylon tie straps, and routing. Replace a cushion clamp if the rubber has deteriorated. Repair or tighten terminals, and secure cables to prevent chafing. Replace damaged cables (cuts, cracks, or excessive wear) (shown on page 5-75). X Batteries (ON HIGHWAY & LINE HAUL) Check for cracks and damage, electrolyte level, condition of terminals, and tightness of holddowns (shown on page 5-75).

X Batteries (OFF-HIGHWAY) Check for cracks and damage, electrolyte level, condition of terminals, and tightness of holddowns (shown on page 5-75). X Battery box and tray (ON HIGHWAY & LINE HAUL) Check the box integrity. Clean the drain tube and check for acid leaks. Check condition of all equipment mounted under the box. X Battery box and tray (OFF-HIGHWAY) Check the box integrity. Clean the drain tube and check for acid leaks. Check condition of all equipment mounted under the box. X Battery Cable Fasteners Check battery cable fasteners and tighten as necessary to 10-15 Lb. ft. (13.6-20.3 N.m.) as specified on the battery label. X