PACCAR Inc. — Maintenance Schedule

PREVENTIVE MAINTENANCE SCHEDULE 5 5-30 PREVENTIVE MAINTENANCE (PM) INTERVALS SYSTEM COMPONENT MAINTENANCE TASK Recommended PM Interval I A B C D E Electrical & lights Headlamps Check the aim and adjust as required. X Warning lights in light bar Check at the ignition start position to verify bulbs and driver information display function (shown on page 3-30). X Turn, Stop, Reverse lights and signals Visual check. X Alternator Check operation and output. X Check tightness of the pulley nut. X Check the tension of the drive belt (shown on page 5-95). X Check tightness of the terminal hex nuts. X Starter Check torque on hex nuts. X ECM connector Check the tightness of the ECM connector.

X Wheel sensors Check for damaged sensors and connectors, and worn or frayed wires. X Fuel and diesel exhaust fluid tank sending unit Check the mounting screws and electrical connections for worn or damaged wires and connectors. X X Power supply harnesses (engine, transmission, etc.) Check for worn or damaged insulation, corroded terminals, frayed wires, and oil or fluid leaks on the connectors or wiring. X Wash to remove excess grease. X Cab structure, doors & hoods Hood Lubricate the lower hood pivot (only if lube fittings are present). X Hinges and latch Lubricate with silicone spray. X Body & cab holddown bolts Check the condition and tightness. X