TIRES AND WHEEL Replacing Tires WARNING Tire chains Front: Replace front tires when less than 4/32 in. of tread remains. Check at three places equally spaced around the tire. Do not replace original equipment tires with load ratings less than the original tires. Doing so could lead to unintentional overloading of the tire, which could cause a failure resulting in loss of vehicle control and an accident. Failure to comply may result in death, personal injury, equipment or property damage. If you need tire chains, install them on both sides of each driving axle. CAUTION Drive Axles or Trailers: Replace tires on drive axles or trailers when less than 2/32 in.
of tread depth remains in any major groove. Check at three places equally spaced around the tire. See the next illustration for recommended measuring points for tread depth. Chains on the tires of only one tandem axle can damage the driveline U-joints and the interaxle differential. Your repairs could be costly & time-consuming. NOTE To prolong your tires’ life and make them safer, have their radial and lateral run-out checked at your dealer. And of course you should have your tires balanced anytime you change a tire. 5 Steer Tire Points (left), Drive Tire Points (right) 5-139