TIRES AND WHEEL Speed Restricted Tires Wheel Mounting and Fastening Wheel Cap Nut Torque WARNING At the first scheduled lube interval, have all wheel cap nuts torqued to their specified value listed in Wheel Cap Nut Torque on page 5-140 . After that, check wheel cap nuts at least once a week. Contact an authorized dealer for information on the proper installation procedure for the wheels on your truck. This is a job you may not be able to do yourself. You need the right torquing equipment to do it. This vehicle may be equipped with speed restricted tires. Check each tire’s sidewall for maximum rated speed.
The vehicle should not be operated at sustained speed in excess of maximum rated speed. Failure to comply with these speed restrictions could cause sudden tire failure which can result in death, personal injury or property damage. After the vehicle travels about 50 to 100 miles (80 to 160 km), wheel mountings seat in and will lose some initial torque. Check hub/wheel mountings after this initial period and retighten. WARNING Never use oil or grease on studs or nuts; improper torque readings will result, which could cause improper wheel clamping and could lead to a wheel failure resulting in an accident. Failure to comply may result in death, personal injury, equipment or property damage.
5 Wheel Cap Nut Torque 5-140 WHEEL & NUT CONFIGURATION STUD SIZE TORQUE FOR INNER & OUTER CAP NUTS & RIM CLAMP NUTS Nm Lb-Ft Steel or Aluminum Disc-Type Wheel; Double Cap Nut Mounting; Standard 7/8 Radius Ball Seat 3/4-16 610-680 450-500 1-1/8-16 610-680 450-500