INSTRUMENT PANEL Driver Information Display Description MCS button is pushed or spun (independent of ignition key switch position) Some Driver Information Display functions are only accessible when the vehicle is parked. Other functions are accessible while the vehicle is moving or when parked. Each function is identified in the following descriptions. NOTE WARNING clock alarm sounds Do not look at the Instrument Cluster Display for prolonged periods while the vehicle is moving. Only glance at the monitor briefly while driving.
Failure to do so can result in the driver not being attentive to the vehicle’s road position or situation, which could lead to an accident and possible death, personal injury or equipment damage. driver or passenger door is opened hazard warning lamp switch is on Service brake switch is on 3 Tractor marker lamp switch is on Trailer marker lamp switch is on Low Voltage Display not active The Instrument Cluster Display, located at the top of the instrument cluster, displays important vehicle information through a constant monitoring of systems when any of the following conditions are met:
and the screen has not been put into "Display Off Mode" In addition to a blank screen, the following are menu items and the information available within each menu selections. ignition key in ON or ACC positions ignition timer is active 3-15