INSTRUMENT PANEL 1. Odometer/Trip Odometer the odometer reading, Press the trip button again to scroll through the other odometers available in the cluster. 2. Outside Air Temperature The Odometer/Trip Meter comes on when the door is opened and when the ignition key is in the ACC or ON position. Used to display outside air temperature information and a warning of low temperatures. The display will also alert the driver when the outside temperate approaches freezing (32° F or 0° C) by displaying a snowflake symbol. The symbol will turn on when the temperature drops below 34° F or 11° C and flash for the first 3 seconds, then stay on until the temperature goes above 37° F or 28° C.
The odometer displays the distance your vehicle has traveled. The display can be configured to display Metric units or English units. 3 The current trip odometer displays how far the vehicle has gone on a particular trip and can display in increments of a tenth of a unit. The maximum distance that can be shown on the trip odometer is 9999.9 before it rolls over to zero. The systems unit of measure (Fahrenheit or Celsius) can be changed by navigating to the settings menu. To reset the trip odometer, press and hold the button on the cluster. The numbers will reset to 0 and begin to count new miles/km traveled.
The outside air temperature display will come on when the door is open and when the ignition key is in the ACC or ON position and turn off when the ignition switch is turned off. Press the trip button on the instrument cluster any time you wish to view 3-16