. OPERATION MACHINE OPERATIONS AND CONTROLS Check Fuel Level, Add Fuel WARNING After checking, turn the switch back to the OFF position. Position of tip (a) of float gauge (G) when fuel tank is full: Approx 50 mm (2 in) 3 - 120 When adding fuel, never s pill the fuel or let it overflow. It will cau se fire. If any fuel has spilled, wip e it up completely. If fuel has spilled ov er soil or sand , remove that soil or san Fuel is highly flammable a nd dangerous. Never bring f lames nea r fuel. 1. Turn the engine sta rting switch to the ON po sition an d check (1) on the monitor panel for fuel le 2.
If fuel is found to be low, unscrew fuel filler ca p (F) on the fuel tank and add fuel t comes up to the hi Fuel tank capac hrough the filler port until float gauge (G) ghest point. ity: 280 liters (73.98 US gal) 3. After adding fuel, p ush float gauge (G) straig ht down w ith fuel filler cap (F). Be car tab of fuel filler cap eful not to get float gauge (G) caug ht in the (F), and tighten fuel filler cap (F) s ecurely. REMARK If breather hole (3) on t he cap is clogged, the pre ssure in t he tank will drop and fuel will n ot flow. Clean the hole fro m time to time.