Komatsu — EVERY 1000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING 1. Turn the valve (1) at the bottom of the fuel tank to the CLOSE position (S). 2. Open the cover on the right side of the machine. 3. Set the container to catch the fuel under the filter cartridge. 4. Using a filter wrench, turn filter cartridge (2) counterclockwise to remove it. 5. Clean the filter holder, coat the packing surface of the new filter cartridge thinly with oil, then install the filter cartridge to the filter holder. 4 - 68 After the engine has been ope rated, all parts are at high temperature, so d o not replace the filter imme diately. Wait for all parts to cool down before starting the operation.

side the engine fuel piping system when the engine is running. High pressure is generated in side the engine fuel piping system when t When replacing the filter, wa it for at least 30 seconds after stopping th e engine to let the internal p ressure go down before replacing the filter. close. Do not bring any fire or flame NOTICE Genuine Komatsu fuel filter cartridges use a special filter that has high ly efficient filtering ability. When replacing the filter cartridge, always use a genui ne Komatsu part. The common rail fuel injectio n system used on this machine consists o f more precise parts than th e conventional injection pump and nozzle.

If any part other than a genui ne Komatsu filter cartridge is used, dust or dirt may get in and cause pr oblems with the injection system. Always avoid using substitute parts. When carrying out inspection or maintenance of the fuel system, pay m ore attention than normal to the entry of dirt. If dirt is stuck to any part, use fuel to wash it off completely. Prepare a container to cat