Komatsu — EVERY 1000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE NOTICE REMARK It is not necessary to remove the plug at the top of the fuel the same procedure to 4 - 69 (Machine of poor f uel arrangement spec Replace inner s eal (3) with a new part Do not fill the new filter cartridge with fuel. Remove cap (B) a nd install the filter cartrid 6. When installin g, tighten until the pack ing surface contacts t he seal surface of the filter ho lder, then tighten it 3/4 of a turn. If the filter cart ridge is tightened too f ar, the packi ng will be damaged and this will lead to leakage of fuel.

If the filter cartridge is too loose, fuel will a lso leak from the pack ing, so always tighten the cor 7. Turn the valve (1) at the bottom of th e fuel tank t o the OPE 8. After completi ng the replacement of filter cartridg e (2), blee d the Bleed the air as fo 9. Fill the fuel tan k with fuel (to the posi tion where t he float is at the 10. Loosen the kn ob of feed pump (4), p and out until th e movement become pre-filter and fu After the engin operate feed pu mp (4) and bleed the 11. Push in the kn ob of feed pump (4) a nd tighten it.