11 10 9 8 7 6 5 4 3 2 1 1. Float chamber 2. Screw 12. Remove the carburetor, and then remove the float chamber by removing the screws. 2 2 2 2 1 8-27 G After the jet needle clip position is changed, the throttle cables may need to be adjusted. NOTE: G Optional main jets can be obtained at a Yamaha dealer. 14. Change the main jet and the jet needle clip po- sition. 1. Float 2. Needle valve 3. Main jet 13. Remove the float and needle valve. 1 2 3