Yamaha YFZ350X — PERIODIC MAINTENANCE AND MINOR REPAIR

11 10 9 8 7 6 5 4 3 2 1 G The throttle stop screws were preset at the factory. When adjusting the idling speed, turn both throttle stop screws the same amount, otherwise the carburetor synchroni- zation will be incorrect. G Adjusting the pilot air screws and the idling speed are separate procedures, but they must be adjusted at the same time to achieve CAUTION: ECB00510 Engine idling speed: 1450–1550 r/min 1. Throttle stop screw (b) (a) (a) (b) 1 8-31 1. Loosen the locknut. 2. To increase the throttle cable free play, turn the adjusting bolt in direction (a). To decrease NOTE:

The engine idling speed must be checked, and ad- justed if necessary, before adjusting the throttle ca- ble free play. EBU24043 Adjusting the throttle cable free play The throttle cable free play should be checked and, if necessary, adjusted at the intervals speci- fied in the periodic maintenance and lubrication chart. The throttle cable free play should measure 4.0– 6.0 mm (0.16–0.24 in) at the throttle lever. Period- ically check the throttle cable free play and, if nec- essary, adjust it as follows. 7. Install the seat. NOTE: If the specified idling speed cannot be obtained as described above, have a Yamaha dealer make the adjustment. optimum engine performance.