Yamaha YFZ350X — PERIODIC MAINTENANCE AND MINOR REPAIR

2. Attach the tachometer to the spark plug lead. 3. Turn in both pilot air screws until they lightly seat. 4. Turn out both pilot air screws to specification. (See the “Changing the carburetor settings” section on the page 8-22.) NOTE: The engine is warm when it quickly responds to the throttle. 1. Start the engine and warm it up. G The carburetor synchronization and the throttle cable free play must be checked, and adjusted if necessary, before adjusting the engine idling speed. NOTE: G A diagnostic tachometer is needed to make this adjustment. tion chart. 8-30 5. Remove the seat. (See page 4-11.) 6.

Check the engine idling speed and, if neces- sary, adjust it to specification by turning the throttle stop screws at the carburetors. To in- crease the engine idling speed, turn the throt- tle stop screws in direction (a), and to decrease it, turn the screws in direction (b). 1. Pilot air screw 1 11 10 9 8 7 6 5 4 3 2 1