Yamaha YFZ350X — PERIODIC MAINTENANCE AND MINOR REPAIR

11 10 9 8 7 6 5 4 3 2 1 4. If not, loosen the locknut and turn the adjust- ing nut until the specified position is obtained. 1. Punch mark 2. Specified position: 0–1mm 2. Push the throttle lever forward until it stops and hold it in this position. 3. Check through each carburetor window to see if the punch mark on the throttle valve is at the specified position. 1 2 1. Adjusting nut 2. Locknut 8-29 EBU24020 Adjusting the engine idling speed The engine idling speed must be checked and, if necessary, adjusted as follows at the intervals specified in the periodic maintenance and lubrica- 5. Move the throttle lever a few times and re- check the position. 6.

Install the fuel tank, side cover, radiator cover and air filter case cover. 7. Connect the fuel hoses. 8. Install the seat. 1 2