Yamaha YFZ350X — PERIODIC MAINTENANCE AND MINOR REPAIR

2. Wipe the drive chain dry. 3. Thoroughly lubricate the drive chain with a special O-ring chain lubricant. To prevent damaging the O-rings, do not clean the drive chain with steam cleaners, high-pres- sure washers or inappropriate solvents. CAUTION: ECB00570 1. Clean the drive chain with kerosene and a small soft brush. The drive chain must be lubricated after wash- ing the ATV or riding in the rain. CAUTION: ECB00560 1. O-ring 8-42 Inspect cables frequently and replace if dam- aged. Corrosion can result when the cable sheaths become damaged, and cables can also become frayed or kinked, which could re- strict the operation of controls and lead to an accident or injury.

EWB02130 EBU24900 Checking and lubricating the cables The operation and the condition of all control ca- bles should be checked before each ride, and the cables and cable ends should be lubricated if nec- essary. If a cable is damaged or does not move smoothly, have a Yamaha dealer check or replace it. Do not use engine oil or any other lubricants for the drive chain, as they may contain sub- stances that could damage the O-rings. ECB00580 WARNING Recommended lubricant: Engine oil 11 10 9 8 7 6 5 4 3 2 1 WARNING