Yamaha YFZ350X — PERIODIC MAINTENANCE AND MINOR REPAIR

11 10 9 8 7 6 5 4 3 2 1 3. Tighten the locknuts and the axle holding nuts to the specified torques. Improper drive chain slack will overload the en- gine as well as other vital parts of the ATV and can lead to drive chain slippage or breakage. To prevent this from occurring, keep the drive chain slack within the specified limits. CAUTION: ECB00541 1. Locknut 2. Drive chain slack adjusting bolt 3. Alignment marks 1 2 3 Tightening torques: Locknut: 16 Nm (1.6 m·kgf, 11 ft·lbf) Axle holding nut (upper): 120 Nm (12.0 m·kgf, 85 ft·lbf) Axle holding nut (lower):

60 Nm (6.0 m·kgf, 43 ft·lbf) 8-41 EBU24880 Lubricating the drive chain The drive chain must be cleaned and lubricated at the intervals specified in the periodic maintenance and lubrication chart, otherwise it will quickly wear out, especially when riding in dusty or wet areas. Service the drive chain as follows.