Yamaha YFZ350X — PERIODIC MAINTENANCE AND MINOR REPAIR

To adjust the drive chain slack 1. Loosen the axle holding nuts. 3. If the drive chain slack is incorrect, adjust it as follows. 1. Drive chain slack 1 8-40 NOTE: There are alignment marks on each side of the swingarm and on the wheel hubs. Use them to check for proper wheel axle alignment. 2. Loosen the locknut on each side of the swing- arm. To tighten the drive chain, turn the ad- justing bolts in direction (a). To loosen the drive chain, turn the adjusting bolts in direction (b) and push the wheels forward. Turn each adjusting bolt exactly the same amount to maintain correct axle alignment. 1. Axle holding nut (upper) 2. Axle holding nut (lower) 2 1 11 10 9 8 7 6 5 4 3 2 1