Yamaha YFZ350X — PERIODIC MAINTENANCE AND MINOR REPAIR

11 10 9 8 7 6 5 4 3 2 1 NOTE: If the specified free play cannot be obtained as de- scribed above or if the clutch does not operate cor- 1. Loosen the locknut at the clutch lever. 2. To increase the clutch lever free play, turn the adjusting bolt in direction (a), and to decrease it, turn the bolt in direction (b). 3. Tighten the locknut. 1. Locknut 2. Clutch lever free play adjusting bolt 3. Clutch lever free play shown. If the free play is incorrect, adjust it as fol- lows. 3 1 2 (b) (a) 8-39 Drive chain slack: 12.0–18.0 mm (0.47–0.71 in) 2. Move the ATV back and forth to locate the tightest portion of the drive chain, and then measure the drive chain slack as shown. NOTE:

When checking and adjusting the drive chain slack, there should be no weight on the ATV and all tires must be touching the ground. To check the drive chain slack 1. Place the ATV on a level surface. EBU24851 Drive chain slack The drive chain slack should be checked before each ride and adjusted if necessary. rectly, have a Yamaha dealer check the internal clutch mechanism.