11 10 9 8 7 6 5 4 3 2 1 1. Shift pedal 2. Neutral position EBU20520 Shifting This ATV has a 6-speed forward transmission. The transmission allows you to control the amount of power you have available at a given speed or for starting, accelerating, climbing hills, etc. To shift into neutral, return the throttle lever to the closed position, apply the clutch, and then repeat- edly depress the shift pedal until it stops. When it stops, it will be in first gear. Raise the pedal slightly to reach the neutral position. 1 2 N 1 2 3 6 5 4 6-3 Opening the throttle abruptly or releasing the clutch lever too quickly could make the ATV EWB00730 2. Pull the clutch lever to disengage the clutch. 3.
Shift into first gear. 4. Open the throttle gradually and at the same time, release the clutch lever slowly. 5. Once the ATV has attained adequate speed, release the throttle, and at the same time, quickly pull in the clutch lever. 6. Shift the transmission into second gear. (Make sure not to shift the transmission into neutral) 7. Open the throttle part way and gradually re- lease the clutch lever. 8. Follow the same procedure when shifting to the next higher gear. Always close the throttle before shifting gears, otherwise damage to the engine and drive train may result. CAUTION: ECB00200 EBU20570 To start out and accelerate 1. Release the throttle lever. WARNING