Yamaha YFZ350X — OPERATION

G Even with the transmission in the neutral po- sition, do not coast for long periods of time with the engine off, and do not tow the ATV CAUTION: ECB00180 Make sure the engine has sufficiently slowed before shifting to a lower gear. Engaging a low- er gear when the engine speed is too high could make the wheels stop rotating and lose traction. This could cause loss of control, an accident and injury. It could also cause engine or drive train damage. EWB00710 EBU20650 To decelerate When slowing down or stopping, release the throt- tle and apply the brakes smoothly and evenly. As you slow down, shift to a lower gear.

Be sure that the engine has sufficiently slowed before engaging a lower gear. Improper use of the brakes or shifting can cause the tires to lose traction, reducing con- trol and increasing the possibility of an accident. wheelie, which would increase the chance of an accident, including an overturn. WARNING 6-4 There is never a more important period in the life of your engine than the first 320 km (200 mi) or 20 hours of riding. For this reason, you should read the following material carefully. Since the engine is brand new, do not put an ex- cessive load on it for the first 320 km (200 mi) or 20 hours. The various parts in the engine wear and NOTE:

G For ATVs equipped with an odometer or an hour meter, follow the figures given in km (mi) or the figures given in hours. G For ATVs not equipped with an odometer or hour meter, follow the figures given in hours. EBU20672 Engine break-in G Always use the clutch when changing gears. The engine, transmission and drive train are not designed to withstand the shock of forced shifting and can be damaged by shift- ing without using the clutch. for long distances. The transmission is prop- erly lubricated only when the engine is run- ning. Inadequate lubrication may damage the transmission. 11 10 9 8 7 6 5 4 3 2 1