Yamaha YFZ350X — RIDING YOUR ATV

Always open the throttle gradually and release the clutch lever slowly. Otherwise, the ATV could wheelie which would increase the chance of an accident. EWB01720 these components. With the engine idling, pull the clutch lever to dis- engage the clutch and shift into 1st gear, and then release the parking brake. Open the throttle grad- ually, and at the same time, release the clutch le- ver slowly. Once the ATV has attained adequate speed, release the throttle lever and at the same time, quickly pull in the clutch lever and shift into 2nd gear. Open the throttle part way and gradually release the clutch. Use this same procedure as you move into the higher gears.

Be sure to coordi- nate the use of the throttle and shift pedal properly. If the throttle is applied too abruptly or if the throttle is not released during shifting, or if the shift pedal is not released before applying the throttle, the front wheels may lift off the ground, resulting in a loss of directional control. Avoid higher speeds un- til you are thoroughly familiar with the operation of your ATV. WARNING 7-12 TURNING YOUR ATV To achieve maximum traction on unpaved surfac- es, the two rear wheels are mounted solidly on one axle and turn together at the same speed.

There- fore, unless the wheel on the inside of the turn is al- lowed to slip or lose some traction, the ATV will resist turning. A special turning technique must be Make sure the engine has sufficiently slowed before shifting to a lower gear. Engaging a low- er gear when the engine speed is too high could cause the wheels to stop rotating. EWB01560 When slowing down or stopping, release the throt- tle and apply the brakes smoothly and evenly. As you slow down, shift to a lower gear. Be sure that the engine has sufficiently slowed before engaging a lower gear.

Improper use of the brakes or shifting can cause the tires to lose traction, reducing con- trol and increasing the possibility of an accident. Do not shift gears without releasing the throt- tle. Damage to the engine or drive train may oc- cur. CAUTION: ECB00230 WARNING 11 10 9 8 7 6 5 4 3 2 1 7