11 10 9 8 7 6 5 4 3 2 1 As you approach a curve, slow down and begin to turn the handlebars in the desired direction. As you do so, put your weight on the footboard to the out- side of the turn (opposite your desired direction) and lean your upper body into the turn. Use the throttle to maintain an even speed through the turn. This maneuver will let the wheel on the inside of the turn slip slightly, allowing the ATV to make the turn properly. Always follow proper procedures for turning as described in this Owner’s Manual. Practice turning at low speeds before attempting to turn at faster speeds. Do not turn at speeds too fast for your skills or the conditions.
EWB01570 used to allow the ATV to make turns quickly and easily. It is essential that this skill be learned first at low speed. WARNING 7-13 This procedure should be practiced at slow speed many times in a large unpaved area with no obsta- cles. If an incorrect technique is used, your ATV may continue to go straight. If the ATV doesn’t turn, come to a stop and then practice the proce- dure again. If the riding surface is slippery or loose, it may help to position more of your weight over the front wheels by moving forward on the seat. Once you have learned this technique, you should be able to perform it at higher speeds or in tighter curves.
Improper riding procedures such as abrupt throttle 1. Lean towards inside of turn. 2. Support your weight on the outer footrest. 1 2