Komatsu — FINAL DRIVE OIL OR PIVOT SHAFT HOUSING SPECIFICATIONS

MAINTENANCE Special break in lubricating oils are not recommended for a new or rebuilt engine. Use the same type of oil during the break in as specified for normal operation. Additional information regarding lubricating oil availability throughout the world is available in the EMA. Lubricating Oils Data Book for Automotive and Industrial Engines. The data book may be ordered from the Engine Manufacturers Association, 401 North Michigan Ave., Chicago, Il U.S.A. 60611. The telephone number is (312) 644-6610.

3 ARCTIC OPERATION If an engine is operated in ambient temperatures consistently below -23°C (-10°F) and there are no provisions to keep the en- gine warm when it is not in operation, use a synthetic engine oil API performance classification CF-4, CG-4, CF-4/SG or CG- 4/SH with adequate low temperature properties such as SAE 5W-20 or 5W-30. The oil supplier must be responsible for meeting the performance service specifications. NOTE The use of a synthetic base oil does not justify extended oil change intervals. Extended oil change intervals can decrease en- gine life due to factors such as; corrosion, deposits and wear.

3 DRIVE TRAIN OIL SPECIFICATIONS NOTE The drive train consist of the following items; rear main frame, steering drive, transmission, torque converter and oil cooler. Komatsu Heavy Duty Transmission Fluid or an equivalent fluid meeting C-4 and TO-4 and not containing a viscosity index improver is recommended. For service only of the drive train, optionally use Komatsu Hydraulic Fluid or engine oil with an API classification of CD/CC, CD or MIL-L-2104D or E and meeting C-3 and TO-2 and containing 0.10% zinc minimum.

3 TRACK FRONT IDLER, TRACK ROLLER, TOP IDLER OIL SPECIFICATIONS Komatsu Heavy Duty Transmission Fluid or an equivalent fluid meeting C-4 and TO-4 and NOT containing a viscosity index improver is recommended. For service only of the track front idlers, track rollers and top idlers, optionally use Komatsu Hydraulic Fluid or engine oil with an API classification of CD/CC, CD or MIL-L-2104D or E and meeting C-3 and TO-2 and containing 0.10% zinc minimum. 3 EQUIPMENT SYSTEM OIL SPECIFICATIONS Komatsu Heavy Duty Transmission Fluid or an equivalent fluid meeting C-4 and TO-4 and NOT containing a viscosity index improver is recommended.

For service only of the equipment hydraulic system, optionally use Komatsu Hydraulic Fluid or engine oil with an API classi- fication of CD/CC, CD or MIL-L-2104D or E and meeting C-3 and TO-2 and containing 0.10% zinc minimum. 3 FINAL DRIVE OIL OR PIVOT SHAFT HOUSING SPECIFICATIONS Komatsu Gear Lubricant or an equivalent multi purpose gear lubricant meeting API GL-5 or MIL-L-2105C is recommended. D87E-2 D87P-2 3-9