Komatsu — KEY START SWITCH

OPERATION 2 SWITCHES 2 KEY START SWITCH This switch (1) is used to start or stop the engine. It has four key posi- tions. R1 position This position is used to check bulbs, warning lights and the audible alarm. OFF position The key can be inserted or removed. The switches for the electric system, except the lighting circuits, are all turned off and the engine is stopped. ON/ACC position Electric current flows in the charging and lamp circuits. Keep the starting switch key in the ON position while the engine is running. This position is also used if the engine is not running when accesso- ries are needed. START position This is the engine start position.

Keep key at this position during cranking. Immediately after starting engine, release the key which will automatically return to the ON position. Remark To prevent damage to the starter motor and avoid low battery output, do not continuously crank the engine for more than 30 second intervals. Allow 1 to 2 minute recovery period be- tween cranking. 2-14 D87E-2 D87P-2