OPERATION 2 WORK LIGHT SWITCH The work light switch is a rocker type switch. Activation of the switch turn on the work lights. Left switch (3) Cab front and rear lights Right switch (2) Hood level and rear fuel tank light Remark The lighting circuits can be operated with the starting key switch in OFF position and master disconnect switch in the ON position. 2 GRID HEATER TIMER SWITCH This switch (4) actuates the electrical heater to warm up the engine in- take air. OFF : Preheating is not actuated. AUTO : Auto preheating is actuated. The length of the preheating time varies according to the ambient temperature when it is below -5° C. I :
This position is used when AUTO preheating is not enough to start the engine in cold weather simply with the switch at the AUTO position. When the switch is released, it will return to the AUTO position. II : This position is used when carrying out preheating manually without using AUTO preheating. When the switch is released, it will return to the OFF position. For details, see “COLD WEATHER STARTING” on page 2-44. 2 GRID HEATER INDICATOR This light (5) indicates that the intake air heater is in the process of be- ing preheated. While preheating is being carried out with the grid heater timer switch, the lamp lights up.
In the case of automatic preheating, the lamp goes out when the preheating is completed. In the case of manual preheating, the lamp goes out when the glow switch is released. 2 HORN SWITCH Depress the switch to sound the horn. NOTE : This added illustration shows the difference for machines equipped with Single Lever Transmission/Steering Control. D87E-2 D87P-2 2-15