OPERATION 2 SEAT BELT Before driving the machine, adjust the seat and fasten the seat belt. Adjust the seat belt to fit snugly and low around the hips to lessen the chance and severity of injury in the event of an accident. Never wear the seat belt across the abdomen. Do not use bleach, color dye or solvents on the seat belt webbing which may cause a severe loss of tensile strength. This could cause the webbing to break resulting in personal injury. It is recommended that the belt be cleaned only with warm water and a mild detergent. To buckle, insert the tongue portion ( A ) of the buckle into the locking portion ( B ).
To release, press the release button ( C ) on the locking por- tion of the buckle and pull the tongue portion out. Keep belts flat to avoid twisting and roping when not being used. Do not place heavy or sharp object on the belts. 2 ARM REST The arm rests may be adjusted up or down for the convenience of the operator. To raise or lower arm rests ( A ), loosen the front and rear mounting bolts ( B ) and position to the desired height. Tighten the bolts after desired height has been obtained. D87E-2 D87P-2 2-21