mercedes-benz Unimog Model Series 405 — UGE_Euro6_en.pdf

Drive Exhaust aftertreatment AdBlue® supply The AdBlue® is supplied via a heated tank. The AdBlue® is supplied via the intake line to the supply unit and from there to the metering unit on the exhaust system via the pressure line. AdBlue® can be diverted from the metering unit directly back to the AdBlue® tank via the return line. A special tank fitting with reduced diameter prevents the AdBlue® tank from being filled incorrectly with diesel fuel. The tank size is 18 l for the U200 and 25 l for all U300/U400/U500 models.

Rear muffler with integrated oxidation catalytic converter, diesel particulate filter and SCR catalytic converter A corresponding catalytic converter volume is required de- pending on the vehicle's engine. Only the following AGN bo- xes (exhaust aftertreatment boxes) are installed ex factory: • 806 mm long on engine OM 934 • 856 mm long on engine OM 936 The AdBlue® intake line between the AdBlue® tank and pump module and the AdBlue® pressure line between the pump module and metering unit are heated electrically by the heating elements integrated in the line sections.

Exhaust box without cover G14.00-3313-00 26 Introduction of the New Unimog Generation | Model Series 405 – This printout will not be recorded by the update service. Status: 03 / 2013 –