mercedes-benz Unimog Model Series 405 — UGE_Euro6_en.pdf

Transmission Main transmission Telligent® engine management Operation takes place via the right multifunction control lever for safe and ergonomic shifting. An optimal gear preselection can be triggered through corresponding operation of the mul- tifunction control lever. Electronic Quick Reverse (EQR) The direct shifting function between the forward and reverse gears in all working gears and the first three on-road gears provides a safe and quick shifting process. Shifting to reverse gears is possible from all forward gears. The clutch must be operated to change gear and the shift operation then takes place automatically, which protects and conserves the engine, clutch and transmission.

This means that the right hand of the driver is free during a gear change (e.g. to operate an implement). The selection of reverse/forward gears via the multifunction control lever provides a high level of shifting safety (hand does not have to be left on the shift lever knob), relieves the stress on the driver, improves handling, improves the driver response to various driving situations and enables better snow clearing performance on car parks/intersections. The use of reverse mode with preselection is designed to prevent the possibility of mix-ups.

Since there is no mechanical/hydraulic connection between the gear selector lever and transmission, there is no possi- bility of vibrations being transmitted into the cab. The low operating forces (shifting work is carried out by pneumatic cylinders) promote relaxed and concentrated driving. The neutral switch with catch position in the multifunction control lever allows direct shifting to neutral from any gear as well as automatic gear selection from neutral at any speed and allows the switch and control elements to be arranged ergonomically.

Multifunction control lever (EQR) Telligent® engine management multifunction control lever G54.25-3466-00 G54.25-3465-00 30 Introduction of the New Unimog Generation | Model Series 405 – This printout will not be recorded by the update service. Status: 03 / 2013 –