Main transmission Transmission The manual transmission is equipped with double-cone syn- chronization for all main gears and the reversing group and features a new transmission control system with 8 forward and 6 reverse gears to ensure optimal vehicle speeds for working deployments and transport journeys. Due to the fine graduations of the lower gears, it is possible to individually adjust the vehicle speed during working deployments. b b Note Pay attention to the engine code for replacement part orders. The synchronized reversing group (EQR), for direct shifting between forward and reverse gears, enables quick reversing and can be used to rock the vehicle free.
Depending on the requirements, the transmission can be ex- tended with a working group or crawler group and thus offers optimal gear-ratio steps for any usage profile. The transmission model of the Euro IV/V vehicles has not changed for the Euro VI vehicles. The technical differences of the transmissi- ons are controlled via the engine code. 29 Introduction of the New Unimog Generation | Model Series 405 – This printout will not be recorded by the update service. Status: 03 / 2013 –