mercedes-benz Unimog Model Series 405 — UGE_Euro6_en.pdf

Drive Diesel particulate filter regeneration "DPF regeneration" No action required: Active regeneration in progress. Pay attention to high exhaust temperatures, comparable to those with wide open throttle, at the exhaust pipes. Do not interrupt regeneration if possible. "High particulate filter fill level" Action required within the next hours depending on fuel consumption and driving profile: Perform an extended trip using significant engine power (freeway, mountain route etc.) or perform manual regeneration. (Duration approx. 30 minutes) "Particulate filter full" Action required depending on fuel consumption and driving profile:

Perform an extended trip using significant engine power (freeway, mountain route etc.) or perform manual regeneration at standstill. (Duration approx. 30 minutes) Immediate action required: Visit a workshop and have the DPF filter replaced. It is only possible to drive to the next workshop under reduced power. Regeneration is no longer possible. Immediate action required: Perform manual regeneration at standstill. (Duration approx. 30 minutes) Message What must be done?

"Particulate filter full" + "Output reduction" "Particulate filter full" + "Service Required" Diesel particulate filter regeneration 28 Introduction of the New Unimog Generation | Model Series 405 – This printout will not be recorded by the update service. Status: 03 / 2013 –