mercedes-benz Unimog Model Series 405 — UGE_Euro6_en.pdf

Hydraulic components Tilting hydraulics The tilting hydraulics are based on the fan hydraulics and are equipped with an additional valve block positioned level with the frame crossmember between the two rear spring brackets. Tilt cylinder actuation: • On vehicles without work hydraulics, the tilt cylinder is ac- tuated on a simple on/off basis via a button in the cab. • On vehicles with work hydraulics (code HN2/HN4/HN6/ HN7/HN8), the tilt cylinder is actuated proportionally via the vehicle joystick. The following versions of the valve block are available: • Fan hydraulics with tilting hydraulics (code HE1) • Fan hydraulics with tilting hydraulics (code HE2) incl.

hy- draulic connection for auxiliary consumers (rail guide and auxiliary rear axle steering) b b Note The tilting hydraulics are also available without tilt cylinder (code H43) e.g. for actuation of external auxi- liary consumers (not permanent consumers). 50 Introduction of the New Unimog Generation | Model Series 405 – This printout will not be recorded by the update service. Status: 03 / 2013 –