Networking Pin assignment of equipment socket Pin Designation Function 1 Terminal 30 +24 V 2 Terminal 30 +24 V 3 Terminal 30 +24 V 4 Terminal 31 Ground 5 Terminal 31 Ground 6 Terminal 31 Ground 7 Terminal 15 +24 V with ignition switched on 8 Terminal 58 +24 V with standing lights switched on 9 Terminal W Alternator rpm signal 10 RKL Signal, rotating beacon on 11 RьLi Signal, backup lamps on 12 C3 Vehicle speed signal 13 C4 Travel signal 14 Actuation of transmission for crane body 15 Switch power take-off N13/N16/N19 on/off 16 Signal‚ power take-off N13/N16/N19 switched on 17 Signal‚ parking brake activated 18 Start-off fixed speed 19 Increase engine speed 20 Reduce engine speed 21 Restore engine speed 22 Engine start 23 Engine stop 24 Transmission lock or reduced vmax + reverse gear lock 25 Function/warning lamp A1 on Instrument 26 Function/warning lamp A2 on Instrument 27 Function/warning lamp A3 on Instrument 28 Unused line routed to X375/PIN 8 (CAN_high) 29 Unused line routed to X375/PIN 9 (CAN_gnd) 30 Unused line routed to X375/PIN 10 (CAN_low) 31 Engine oil pressure warning indicator, min.
32 Warning indicator, engine coolant, max. 70 Introduction of the New Unimog Generation | Model Series 405 – This printout will not be recorded by the update service. Status: 03 / 2013 –