International Trucks VT 275 — VT275 manual

LUBRICATION SYSTEM Gerotor Pump The gerotor style oil pump is integrated into the front cover with the gear set driven off two flats on the nose of the crankshaft. The gear set rides directly on the surface of the crankcase front cover. DOWEL PIN DOWEL PIN The gears are a matched set, and should be marked before disassembly so they can be reassembled with the same side facing out. COVER COVER The oil pump front cover is located with two dowel pins and sealed with a press-in- place gasket. DOWEL PIN GEAR SET Oil Pressure Regulator Valve The oil pressure regulator valve is responsible for regulating the maximum pressure in the lubrication system.

The regulator, which can be removed with the engine in the chassis, is located in the front cover just below the gerotor oil pump cover. REGULATOR REGULATOR PISTON PISTON PLUG PLUG The face of the regulator piston is exposed to the pressurized oil. When pressure exceeds 75 psi, the piston is depressed against spring pressure enough to expose a port that allows excess oil to be relieved to the suction side of the pump. REGULATOR HOUSING REGULATOR SPRING 63 International ® VT 275 V6 Engine