LUBRICATION SYSTEM OIL COOLER COVER OIL COOLER COVER Oil Cooler The stacked-plate type oil cooler is mounted to the bottom of the oil cooler cover. When the cooler cover is set in place on the crankcase, the cooler sets in the high-pressure oil reservoir. The water pump circulates coolant through the cooler to remove excess heat from the engine oil. The coolant and oil are separated by multiple plates that create passages in the oil cooler. The cooler cover and cooler are not serviced as separate components. HIGH PRESSURE OIL RESERVOIR OIL COOLER The volume of the reservoir, with the oil cooler in place, is approximately one quart.
Oil Cooler Housing and Oil Filter Base • The oil cooler cover, oil filter base, and oil filter adapter all contain passages that direct the flow of oil. In addition, the oil cooler cover and the oil filter base both contain passages that direct the flow of coolant. THE OIL PUMP THE OIL PUMP UNFILTERED OIL FROM UNFILTERED OIL FROM FILTERED AND COOLED OIL FILTERED AND COOLED OIL COOLANT TO THE COOLANT TO THE COOLER COOLER FILTER FILTER COOLED OIL TO THE COOLED OIL TO THE OIL COOLER COVER OIL COOLER COVER Oil is routed from a passage in the crankcase to the oil cooler cover inlet where oil is directed rearward to the oil cooler.
Oil flows through the cooler and is then directed through the oil filter adapter. Oil passes through the filter and down the standpipe, then back to the oil filter base where it's directed to the reservoir and the main oil galleries. Coolant is directed from a passage in the crankcase to the to the cooler cover. Coolant passes through the oil cooler and exits at the EGR cooler supply port. EGR COOLER EGR COOLER OIL TO THE COOLER OIL TO THE COOLER COOLANT TO THE COOLANT TO THE OIL FILTER BASE OIL FILTER BASE The oil filter adapter mounts the oil pressure switch and the oil temperature sensor, and feeds oil to the turbocharger lubrication line. 64 International ® VT 275 V6 Engine