LUBRICATION SYSTEM Oil Filter • The VT 275 uses a cartridge style oil filter located on top of the engine. FILTER LID FILTER LID FILTER ELEMENT FILTER ELEMENT When the oil filter is removed, the oil filter drain valve opens to allow oil to drain from the filter housing, through the adapter, and back to the oil pan. The oil filter element snaps onto the lid. This allows the filter element to be extracted without contact with the element. Note: The oil filter lid should be removed before draining the oil from the oil pan so that the oil can drain from the filter housing into the oil pan.
OIL FILTER HOUSING FILTER BYPASS VALVE FILTER BYPASS VALVE Oil Filter Bypass • The filter bypass valve is located at the top of the filter standpipe. The top of the oil filter element has a hole that matches the location of the valve. Unfiltered oil surrounds the filter, including the top of the filter and the bypass valve. The valve opens if there is a pressure difference of 32 psi between the outside of the paper filter material, which is unfiltered oil, and the inside of the filter paper. STANDPIPE STANDPIPE OIL FILTER HOUSING 65 International ® VT 275 V6 Engine