LUBRICATION SYSTEM Turbocharger Feed Line • Pressurized oil from the filtered passage in the oil-filter adapter is supplied to each center section of the twin turbocharger. The oil is transferred through a hose to the turbocharger. TURBOCHARGER OIL LINE SUPPLY TURBOCHARGER OIL LINE SUPPLY The turbocharger ends of the hose are sealed with face seals. The oil filter adapter end of the hose pushes into a cavity on the filter adapter and is sealed with O-rings and retained by a single cap screw. OIL OUTLET OIL FILTER ADAPTER 2) LEFT 2) LEFT Crankcase Oil and Coolant Passages • There are six crankcase passages near the oil reservoir. BANK BANK 5) FILTER DRAIN 1) FEED TO 1. Oil feed to the cooler:
Directs oil from the pump to the oil cooler. COOLER 3) RIGHT 3) RIGHT BANK BANK 2. Left Bank: Feeds filtered and cooled oil to the left bank tappets and piston cooling jets. 6) TO HIGH PRESSURE PUMP 3. Right Bank: Feeds filtered and cooled oil to the right bank tappets, piston cooling jets, and the main bearings and cam bearings. 4) COOLANT TO OIL COOLER 4. Coolant: Feeds coolant from the water pump to the oil cooler and the EGR cooler. 5 . Filter Drain: Allows drain oil from the filter to reach the oil pan when the filter is removed. 6. Reservoir: Feed to the high-pressure pump. 67 International ® VT 275 V6 Engine