International Trucks VT 275 — VT275 manual

COOLING SYSTEM Front Cover Flow • Coolant is drawn into the water inlet by the water pump. Coolant is discharged from the pump to the crankcase coolant jackets. Coolant is also routed from the front cover through a crankcase passage to the oil cooler cover. FROM THE INTAKE MANIFOLD FROM THE INTAKE MANIFOLD TO RADIATOR TO RADIATOR SUPPLY SUPPLY HEATER HEATER RETURN RETURN HEATER HEATER Return coolant from the crankcase coolant jackets is directed to the thermostat by the front cover. If the thermostat is open, coolant flows to the radiator to be cooled. If the thermostat is closed, coolant is returned to the water pump via a bypass circuit in the front cover.

FROM RADIATOR FROM RADIATOR Crankcase Flow • Coolant is directed out of the front cover to the crankcase through three passages. Two of the passages route coolant through the crankcase water jackets to cool the cylinders and cylinder heads. The third passage routes coolant to the oil cooler via a passage in the crankcase. FROM THE INTAKE MANIFOLD FROM THE INTAKE MANIFOLD There are three passages for coolant return to the crankcase. Two receive coolant from the crankcase and one receives coolant from the intake manifold. FRONT COVER FRONT COVER Coolant Flow/Oil Cooler Engine coolant is routed to the oil cooler cover via a passage in the crankcase.

TO INTAKE TO INTAKE MANIFOLD MANIFOLD The cooler cover directs the coolant through the oil cooler and then into the EGR cooler via the intake manifold. OIL COOLER OIL COOLER The oil cooler bundle is sealed at the cover with two O-rings at both the inlet and outlet pipe areas. To prevent mixing of oil and coolant, the area between the two seals is vented through a weep hole on the cooler cover. This allows leakage past either seal to weep out of the cooler cover. International ® VT 275 V6 Engine 69