International Trucks VT 275 — VT275 manual

COOLING SYSTEM EGR Cooler Flow • Coolant flow from the oil cooler is directed through the cooler cover to the intake manifold. Coolant flows from the manifold into the EGR cooler then back into the manifold to return to the front cover. The EGR cooler is used to reduce the temperature of the exhaust before it reaches the EGR valve. EGR Cooler Seal • The intake manifold fits over the oil cooler cover outlet to receive coolant flow from the oil cooler. The EGR cooler bolts to the manifold and has two coolant ports connected through O-rings to the manifold. The EGR cooler inlet to oil cooler cover seal consists of both a rubber seal and an O-ring.

EGR COOLER SEAL EGR COOLER SEAL O-RING O-RING Glow Plug and Injector Sleeves • The VT 275 uses stainless steel injector sleeves to seal coolant from the injectors. The injector sleeves are used to aid in the transfer of heat from each injector to the coolant. The injector sleeves are replaceable. GLOW PLUG SLEEVE GLOW PLUG SLEEVE Stainless steel glow plug sleeves are used to seal coolant from the glow plugs. The glow plugs sleeves are also replaceable. INJECTOR SLEEVE INJECTOR SLEEVE 70 International ® VT 275 V6 Engine