C Series Troubleshooting Overview Section TS - Troubleshooting Symptoms Page TS-13 Air Compressor Pumping Excess Lubricating Oil into the Air System This is symptom tree t007 Cause Correction STEP 9 Air compressor drive gear or engine gear train is Inspect the drive gears and gear train and repair as necessary. Refer to the Master Repair Manual, Holset® Air Compressors, Bulletin 3666121. worn or damaged ............. OK Go To Next Step Replace the desiccant cartridge on the Turbo/CR 2000 air dryer. Refer to the OEM service manual. Check the air compressor duty cycle. Install a larger air compressor, if necessary. Refer to the Master Repair Manual, Holset® Air Compressors, Bulletin 3666121.
STEP 10 Air compressor pumping time is excessive .............