Troubleshooting Overview C Series Page TS-18 Section TS - Troubleshooting Symptoms Alternator Overcharging This is symptom tree t014 Cause Correction STEP 1 Battery cables or connections are loose, broken, or ............. Check the battery cables and connections. Refer to Procedure 013-009. corroded (excessive resistance) OK Go To Next Step STEP 2 Voltmeter is malfunctioning ............. Inspect the voltmeter. Replace as needed. Refer to OEM service manual. OK Go To Next Step STEP 3 Battery condition poor ............. Load-test the battery. If the battery charge is low, charge the battery. If battery fails the second load test, replace the battery. Refer to Procedure 013-007.
OK Go To Next Step STEP 4 Alternator is malfunctioning ............. Test the alternator output. Refer to Procedure 013-001 or OEM service manual if non-Cummins alternator.